• Print
• 
• 
• 

The Handler II, III, and IV (*Plus Trailer set up and Hot Tanks Options)

The key to a successful spraying operation is spending less time loading and more time spraying, without sacrificing safety. The Handler enables a quick and easy process, more importantly, safe mixing and loading of chemicals into sprayers. Available in 3 convenient sizes The Handler reduces the time that it takes to properly load and mix a sprayer.

The Handler became the top-selling specialty loading chem handler system in North America because of its ability to cut, empty and rinse a container in seconds. As spraying has changed, so has The Handler. In addition to The Handler knife, the system also mixes powders and dry products easily and quickly. It draws from bulk containers using the Handler venturi, utilizing cone-bottom, calibrated tanks to easily accommodate batch mixtures and bulk chemical metering.

The Handler was originally developed by a Canadian farmer who was tired of having to climb up into his sprayer to repeatedly dump 2 1/2 gallon jugs of chemical, only to fight with rinsing them. The Handler was designed to spearhead the evolution of total crop protection management.

Models and features (*ask about other models and options including: with or without pumps, recirc kits, special hot tanks, and **Flaman sprayer trailer set up units in stock):

• (Handler II) - Suitable for everything for 10L and 20 L containers to bulk containers. This is the most compact 3" inductor system on the market (42 US Gallons/160L)
• (Handler III) -  Larger 70 US gal tank combined with cost-effective plumbing and integrated pump designed to handle the rigors of any pump, (70 US Gallons/ 275 L)
• (Handler III HD) - 3” HD w/ 13 HP Pump, Recirc Kit, Electric Start & 100PSI Spike Arrester
• (Handler IV) - Comes with or without an integrated pump - dual port venturi - able to induct bulk chemical into Handler (230 US gallons/870 L)

The Handler’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.

*The venturi is a specially-designed fitting that draws chemicals from the Handler into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemical before they enter the sprayer tank, and provides continuous flush, saving time and eliminating contamination.

Deliveries are available, ask your salesperson for details.