Flaman Rentals Blog

AGI Batco UCX3 Conveyor. U-Trough Convenience. All Commodities.

Posted by Jeff Brown May 08, 2023

We could speak volumes about the volumes the all-commodity AGI Batco UCX3 U-Trough Belt Conveyor can process. It’s powerful, high-capacity, and fast. In ideal conditions, it can move up to 12,500 bushels (about 340 tons) of canola in a single hour.

At that rate, it’s not sheer fantasy to imagine loading a Super B in 10 minutes. Even heavier crops like wheat and peas still whistle through at about 10,000 BPH.  



Fast as that ride might be, the cereals, pulses, oilseeds, or fertilizers you put through it come out hardly the worse for wear. Gentle handling is the beauty of a U-trough system – especially one with the UCX3’s problem-solving design. It focuses on eliminating points where spillage, crushing, and other damage can occur, from intake to spout.



Advanced Leakage Protection
That starts with the redesigned collapsible hopper. It’s built low, so you can be sure it will fit easily under any bin. The new, reinforced design also maximizes grain flow by minimizing potential leakage and grinding along its sides.



A double-lip sealed edge keeps your commodities tightly in place as they travel up the conveyor’s 15” Direct X belt. It’s a U-trough-ready update of the chevron pattern used in the successful AGI Batco BCX3 tube conveyor. 

Sticking With What Works
The BCX3 design worked so well that many of its features have been incorporated into, or adapted to, the UCX3. These include:

Turbo clean wash system, two belt scrapers, and belt brush. Working together in one remarkably easy clean-out process, they keep your belt debris-free and oilseed-friendly.



Redesigned S-Drive. Easily adjusted with normal tools, this feature keeps your belt running straight and true without the risk of overtightening your pinch-roller bearings. 

IBEX Mover Kit. Redesigned with a built-in braking system and a 160° turning radius, the IBEX is powerful and easy to maneuver whether you’re on a flat, dry surface or navigating deep muck. Two features provide the outstanding traction you’ll need to get you through a rain or snow-drenched day in your bin yard: Skid steer-style tires for better traction and single-wheel drop-and-go convenience and balance.



More Power to U. 
One notable difference between the U-Trough Conveyor and the BCX3 is the size of their engines. The BCX3 offers a choice of two gasoline engines – the 32HP Kohler or the 33HP EFI Vanguard. The UCX3 bumps the power up with a 40HP EFI Vanguard motor and upgraded drive components to further increase hydraulic performance and longevity. 



Learn what the UCX3 can do for you at Flaman.
Want to know more about the AGI Batco UCX3 U-Trough Conveyor? You can find expert advice at 11 Flaman dealers across Manitoba, Saskatchewan, and Alberta. Drop by your nearest Flaman location and get an up-close look at features like the ergonomic command centre, IBEX Mover Kit, and spillage control.



Ask our knowledgeable sales staff how the UCX3 or any of our other equipment can help your farming operation.  

Posted in Product Information | Tagged with agi batco u-trough conveyor belt oilseed | More articles by Jeff Brown

Three reasons the Batco BCX3 needs to be your next conveyor

Posted by Mitch Flaman Jan 21, 2021

It’s here. The legendary orange “gentle giant” from AGI/Batco has received more than a facelift for 2021. After a complete redesign from hopper to downspout, the BCX3 conveyor has a few new features worth bragging about. Aside from the redesigned S-Drive, new Turbo-Clean Wash System, and remodeled fuel tank, there are still 3 big upgrades that make this the most versatile conveyor yet.

1. Move All Commodities - Most notably, the biggest feature of 2021 is the BCX3 conveyor’s ability to move all farm commodities - that’s right, INCLUDING CANOLA. Gentle on pulses, quick on cereals, and capable of oilseeds, you now have one tool for all your jobs. This has been made possible with a redesigned hopper & downspout, plus the new Turbo-Clean wash system with multiple scrapers & brushes. As with the use of any oilseed, additional maintenance and cleaning is required to ensure the longevity of your conveyor.  
    
2. Multiple Controls, One Location - Redesigned, with functionality and safety in mind, you will find all the controls in one location. This means you can adjust the throttle, engage the clutch, change the height for both hopper & discharge, and drive all from one spot. No more reaching. The conveyor’s control center has been relocated to provide better ergonomics and visibility as you drive, as well as additional clearance when setting up underneath your hopper.  
   
   
   Ergonomic Command Centre
    
3. Move with Ease - A completely redesigned mover adds substantial traction and maneuverability for your conveyor. The new all-terrain tire design has been coupled with an internal braking system to prevent rollback. The drop-and-go design is simple and safe - no more engaging or locking hubs. The drive wheel has been relocated to better utilize the weight distribution of the conveyor. This adds strength and exceptional traction. Did we mention the increased turning radius? The new mover design offers unparalleled maneuverability and versatility. 
   
   
   Redesigned Mover Kit

You need to see it to believe it.  

For more information on our AGI Batco BCX3 conveyors, talk to one of our ag specialists at your nearest Flaman location or give us a visit and we would be happy to show you what all the buzz is about! We may even let you take it for a spin. Even with winter conditions, we can assure you that you won’t need to worry about getting it stuck! 

Posted in New Products | Tagged with conveyor Batco BCX3 grain handling | More articles by Mitch Flaman

A Brief History of the Newest Flaman Store in Swift Current

Posted by Jennifer Thompson Jul 07, 2020

Flaman Group of Companies started on the farm over 60 years ago, when founder Frank Flaman saw a way to help other farmers by buying bins in bulk. That spirit of “making things better” for the farming community continues on today, so when Flaman had the opportunity to partner with an innovative, farm-focused company like Gatco Manufacturing, known for its quality products designed for farmers, the choice was easy.
 
The Flaman Swift Current and Gatco location

Products Designed by a Farmer, For Farmers
Gatco was started by a Saskatoon area farmer, Gary Schreiner. Schreiner had a problem: he was losing canola bins to overheating and needed a solution for remote bin yards that had no power.  He began trying different combinations of perforated tubes in an effort to create a venting system inside the grain bin.  This led to the creation of the GrainAir Tube powerless aeration system.  The GrainAir tube allows heat and moisture to escape the bin quickly, by letting heat collect in the central tube and relying on convection to remove heat from the bin without any fans.
 
A couple year’s later, Schreiner was moving his load out auger and plastic hopper in his yard and slipped while maneuvering the plastic hopper.  He knew there had to be a safer way to do this, and so the Auger Hog Hopper was born. This adjustable, detachable grain auger hopper attaches and detaches in seconds with a single mount pin, stays on your auger between bins, and adjusts from 12" to 29" in height merely by moving the handle. Due to the Auger Hog’s u-trough design, it also increases the average augers speed by 20-25% and prevents any product loss.
 
The Auger Hog

With the GrainAir tube working well, Schreiner felt there had to be a way to make a more efficient aeration system.  While researching grain dryers, he found that air moved through grain easier horizontally, so he developed louvered wall columns that were pressurized with a common aeration fan.  The air would leave the wall columns and travel horizontally to the central GrainAir tube and be released out through the bin lid quickly and easily.  This CrossFlow system is far more efficient than traditional air systems, as the air travels less distance and moisture and heat is removed from the bin much faster. 
 
“Gary came up with these unique solutions to help make farming easier,” says Bret Watson, Gatco division manager, who’s worked for the company since 2013.

 Bret Watson (Gatco Division Manager & Flaman Operations Manager)
 
A Natural Partnership in Swift Current
It was that line of innovative, farmer-proven products that made Gatco a natural fit to join the Flaman team, says Watson, who is also the operations manager for Flaman’s Swift Current location. Gatco was purchased by Flaman Sales in 2018, when Schreiner decided he wanted to devote more time to his farming operation. “The companies are both family-owned and started on the farm,” says Watson. “We were selling to the same customers and trying to provide that same level of service. It was a nice, natural fit.” 



With that purchase, Flaman Sales started their 7th store in Saskatchewan. The Swift Current location began as one-person business with Watson, but since February 2020 has added 5 more staff in sales, administration and yard staff, along with acquiring a second, 4-acre yard to expand on-hand inventory and provide better sales and service.


Mellissa Paxman (Administration), Bruce Deg (Ag Sales), Brittany Fiddler (Logistics Coordinator), and Rick Spanier (Yard & Support)

The Swift Current store is a full-service Flaman Agriculture equipment dealership, offering a wide range of in-stock grain-handling equipment such as augers, conveyors, post pounders, grain vacs, grain carts, grain bins, grain dryers, grain monitoring, and water and fertilizer tanks. Customers can also order products from the Flaman catalogue like discs, mowers, chem handlers, pumps, and more.

Bob Schafer (Ag Sales)

“We’re proud to offer equipment options to the local community,” says Watson. “Farmers don’t have to drive to Saskatoon or Southey anymore. This location allows Flaman to serve customers all over southwest Saskatchewan.”

 -----
To contact our Swift Current location, please click here.
To view some of the products in inventory, click here.
Posted in Division News | Tagged with agriculture Swift Current Flaman new store local shop local southwest Saskatchewan | More articles by Jennifer Thompson

ATC Trailer Podcast

Posted by Steve Whittington Jan 29, 2014

In this episode of Trailer Talk we learn about ATC trailers, their value stream manufacturing and some really unique products. Industry veteran (24 years!) Trent Sheets tells us the story.

Posted in Podcasts | Tagged with Trailer Talk Podcast ATC | More articles by Steve Whittington

Rain, Rain Go Away

Posted by Mark Flaman Jul 02, 2013

Well, we've had about as much rain as a person needs for the rest of the year. It seems like it's been raining across the province non-stop for the last two weeks of June. We've seen an exceptional amount of flooding this year across western Canada, mainly in High River & Calgary Alberta, but the immense rain stretched and blanketed over Saskatchewan for almost the whole of the last two weeks of the month. In Manitoba and Saskatchewan, most farmers are at least a couple of weeks behind due to the late thaw of the snow, but as it happened, the thaw occurred too fast and now we're left with all this water.

It's one thing when you see it on the news, but recently I've been seeing it a lot first hand in Saskatoon as well as the RM of Corman Park, where out Saskatoon store is located. There are farmers with children that have to get off the bus and throw on their rubber boots just to get down the lane way. There are also acreage owners here that have to leave a vehicle at the end of the driveway, and come back and forth to the house with an ATV.  There have been evacuees flooding in from northern Saskatchewan, from places such as Cumberland House who are staying at soccer & events centers around this city. These folks will thankfully be able to return home on July 3rd.

But yet, nothing compares to the damage being done in Alberta. There have been fatalities due to the flooding, and there are going to be millions in damages by the time this is all said and done. The Calgary Zoo had to relocate most of their animals, and had a few scares with losing some to the flood. The Saddle dome and Stampede grounds are under water, and several neighborhoods had to evacuate and relocate to drier ground. As our nation's fourth largest city is crippled by these floods, we stand by them as they can use all the support we have to offer.

 The weather forecast shows that this is about it for the rain we're about to receive, and brighter days are ahead. We had a great Canada Day July long weekend, and we're going to be hovering around the 25 degree mark for the next two weeks with the exception of a little rain this weekend.

Posted in Local News | Tagged with rain flood flooding saskatchewan flaman alberta calgary high river news | More articles by Mark Flaman

We're proud to be an ABEX finalist!

Posted by Jennifer Thompson Oct 04, 2012

As a project manager for Flaman’s marketing team, I am proud and excited to announce we’ve once again been nominated for a Marketing Award. Flaman Group of Companies was named a finalist in the 2012 Achievement in Business Excellence (ABEX) Awards in the Marketing category.

Posted in Division News | Tagged with award marketing ABEX business award Saskatchewan Flaman | More articles by Jennifer Thompson

New website, new dealers for summer 2011

Posted by Barrett Prokopie Jul 05, 2011

This spring has been a very different one for many producers in the prairies, from near disastrous flooding in the southern parts of Saskatchewan and Manitoba, to drought in northern Alberta and B.C. It seems that nothing is predictable in the agricultural sector anymore (if it ever was).

Posted in Division News | Tagged with rentals new website dealers ag equipment trailers Saskatchewan Alberta | More articles by Barrett Prokopie